The main structure and parts of CNC cutting machine

This article mainly introduces its main structure and structure description of each component. The structure of CNC cutting machine generally includes large frame, frame and torch, longitudinal drive gear box, transverse drive gear box, torch lifter, torch holder and so on.

Series CNC cutting machine rack mounting

The frame includes beams, main end beams, secondary end beams, and longitudinal gear boxes. The frame is an integral part that can only be hoisted as a whole. When hoisting, it is necessary to ensure that the lifting is safe and reliable. Therefore, before hoisting, it is necessary to check whether the lifting tools such as the lifting beam are intact, and avoid the bending and torsion deformation of the large frame when hoisting.

Side guide rollers are fixed on one side, and the other side is adjustable for movement. In order to make the frame of the CNC cutting machine easily fall on the guide rails, the disc spring must first be released so that the distance between the fixed roller and the movable roller can be increased as much as possible.

Open the outside housing of the longitudinal gear box, disengage the screw and spring used to press the gear box, swing the gear box to a certain angle, and then block it with a solid block such as wood, so that it can be effectively avoided during installation. The gear and rail rack collide.

When the big frame is lifted by a lifting tool, the surface of the roller must be scrubbed with a cleaning agent. After scrubbing, the surface of the roller should be slowly lowered and placed on a longitudinal rail. When doing this process, the four corners of the big frame should be observed by special persons. Conduct by the special person in the middle, should move slightly when approaching the guide rail, pay attention to should drop the side of the side guide roller first. Do not bump the rail surface.

After the big frame is installed, we must also look at the contact between the front end beam and the front guide wheel and the guide rail, press the disc spring, so that the main end beam side guide wheel and the guide rail have good contact to ensure the frame has a good guide.

Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional!